Gateway » S Series » S-7320M

Gateway » S Series » S-7320M LCD Screen Replacement Guide

How to Remove Replace Install your Gateway S Series S-7320M Laptop LCD Screen

1. Remove the rubber covers from you Gateway S-7320M LCD Screen.

2. Use a philips head screw driver to remove the screws.

3. Pry off the Gateway S-7320M Plastic LCD bezel.

4. Remove the screws from the side of the LCD hinges.

5. Handle the Gateway S-7320M LCD hinges with care as they are delicate.

6. Place the Gateway S-7320M LCD Screen down on its front and remove the LCD ribbon cable from the LCD.

7. Unplug and remove the Gateway S-7320M Inverter from the LCD.

8. You are now ready to replace and install your new Gateway S-7320M LCD Screen.

9. Recconnect back your Gateway S-7320M Inverter LCD Cable and Hinges.

10. Place the screws back in and secure the Plastic LCD Bezel back in place.